Photoelectric Beam Sensor TAKEX TXF-20TDM

- TAKEX TXF-20TDM designed for compatibility with leading wireless systems, our battery operated TXF-20TDM Twin Beam is ideal for rapid deployment; create temporary or permanent secure intruder detection systems without costly civil engineering groundworks.

- 2x Synchronised high power beams.

- Double modulation for increased light immunity.

- 4 Selectable beam channels to prevent crosstalk.

- Up to 3 years battery life using 4 x LS33600 (3.6V 17Ah) batteries (TX:2pcs, RX:2pcs).

- ±95° horizontal/±10° vertical adjustment.

- Compatible with numerous wireless transmitter units.

- IP55 Housing.

Specification

Detection system Near infrared pulsed beam interruption system (TR-RE 2 beam simultaneous interruption)

Infrared beam Double modulation pulsed beam by LED (near infrared beam light-emitting diode)

Protection distance Outdoor 20m or less

Distance margin (maximum arrival distance) 10 times: 200m

Response time 50ms, 100ms, 250ms, 500ms (4-level changeover)

Modulated beam frequency selection 4 channels

Power supply voltage 3.6VDC (recommended battery: SAFT lithium-thionyl chloride battery LS33600)

Current consumption Transmitter: Approx. 670μA (during protection)

Receiver: Approx. 520μA (during protection) (normal temperature, 3.6V DC)

Battery life Transmitter: Approx.3 years (at normal temperature, with 2 recommended batteries, excluding wireless transmitter)

Receiver: Approx.3 years (detects 100 times a day, at normal temperature, with 2 recommended batteries, excluding wireless transmitter)

Alarm output (receiver only) Contact method: Solid state swich form C

Contact capacity: 3.6V DC 0.01A (resistive load)

Low battery output

(transmitter and receiver) Contact method: Solid state swich (N.O.)

Contact capacity: 3.6V DC 0.01A (resistive load)

Tamper output (cover) (transmitter and receiver) Contact method: Solid state swich (N.C.)

Contact capacity: 3.6V DC 0.01A (resistive load)

Power output (transmitter and receiver) 3.0 to 3.6V DC 65mA max. (2 × new batteries)

Beam adjustment Horizontal: ±95°, Vertical: ± 10°

Alarm LED Red LED (Receiver) ON: when alarm is generated (Active only when the cover is open)

Attenuation LED Red LED (Receiver) ON: when beam is attenuated (Active only when the cover is open)

Ambient temperature -25°C to +60°C (-13°F to +140°F) (No freezing or condensation)

(The battery function may decrease at 0°C or less, or +40°C or more)

Functions Sound check, Monitor jack, Low battery indication, Battery saving, Repeat output

IP rating IP 55

Mounting position Outdoor, Indoor

Weight Transmitter: 500g (17.6oz) (excluding batteries)

Receiver: 520g (18.3oz) (excluding batteries)

Appearance Cover: Resin (Wine red)

Base: Resin (Black)

- Bảo hành: 12 tháng.