Triple Mirror Passive Sensor TAKEX PIR-T15AM

- Triple Mirror Optical System: The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including low position, high position, pet, and high density; for distances up to 49’ (15m) from a mounting height of 6.6’ (2m) to 20’ (6m), throughout a full 80°.

- Optimised Detection Area: The triple mirror optical system features a geared mirror array allowing detection patterns to be dynamically optimised for maximum performance depending on the chosen mounting height and operation mode.

- Pet Immunity: Independently controlled pyro devices in each optical unit use intelligent signal processing to eliminate nuisance alarms from small animals, and a dedicated pet operation mode further enhances discrimination performance against medium-sized animals.

- Precise Area Adjustment: Precise detection area adjustment is made possible by projecting coloured LED’s onto the surface of each mirror -visible only from inside the detection zone during the alignment process allowing sensitive zones to be fine-tuned to individual site requirements as desired. Unnecessary areas can be cancelled using the supplied area-masking sheet.

- Design Conscious: The PIR-T15WE’s unassuming design allows it to blend discreetly into any industrial, commercial or domestic environment, and the internally adjustable optic system helps to conceal the detection area and direction for more secure protection.

- Other Functions: Enhanced features including creep zone detection, near area cancellation, dual outputs, and lightning surge protection make the PIR-T15WE a key addition to the TAKEX family of high performance intrusion detection sensors.

Specification

Model TRIPLE MIRROR PASSIVE SENSOR

Model number PIR-T15AM

Detection system Passive infrared

Detection area Wide angle (80°) detection

Detection distance: 49’(15m), 108 rays (54 pairs)

Power supply 9 to 28V DC (non-polarity)

Current consumption Max. 50mA

Alarm output Contact method : Dry semi-conductor contact, N.C./N.O. selectable

Contact operation : One-shot operation when detecting intrusion

Continuous output in the event of cover monitor error

Continuous output in the event of alignment position error

Continuous output in the event of self diagnosis error

Continuous output in the event of power voltage error

Continuous output in the event of long-term diagnosis error

Contact rating : 24V (AC/DC) 0.25A (resistive load)

(built-in contact protective resistor 3.3Ω)

External output Contact method : Dry semi-conductor contact N.O.

Contact operation : One-shot operation/Off delay operation selectable when

detecting intrusion

Contact rating : 24V (AC/DC) 0.25A (resistive load)

(built-in contact protective resistor 3.3Ω)

Tamper output Contact method : Dry mechanical contact, N.C.

Contact operation : Continuous output

Contact rating : 24V (AC/DC) 0.1A (resistive load)

(built-in contact protective resistor 3.3Ω)

Anti-masking output Contact method : Dry semi-conductor contact N.C.

Contact operation : Continuosly output when an object is

placed in front of the lens (until nomal recovery)

Contact rating : 24V (AC/DC) 0.25A (resistive load)

(built-in contact protective resistor 3.3Ω)

Alarm LED Red LED : Blinks* during warm up

Lights up* when detecting intrusion

Continuously blinks in the event of cover monitor error

Continuously lit in the event of alignment position error

Continuously blinks in the event of self diagnosis error

Continuously lit in the event of power voltage error

Continuously blinks in the event of long-term diagnosis error

Continuously blinks in the event of Anti-masking error

(*ON/OFF selectable using the mode selector)

Memory LED Red LED : Blinks for 3 minutes during memory display, Auto reset operation either

of continuous lighting for 47 minutes or blinking for 50 minutes selectable

(Blinks to lights/blinks, ON/OFF selectable using the mode selector)

Functions Sensitivity selection

Operation mode selection

Alarm memory LED

Self diagnosis

Low voltage monitoring

Temperature compensation

LED area checker

Front & back tamper

Environmental adjustment

Creep zone detection

Walk test mode

Near area cancellation

Long-term diagnosis

Anti-masking

Installation height 6.6’ to 20’(2.0 to 6.0m) (varies depending on the operation mode)

• Low position mode : 6.6’ to 9’(2.0 to 2.7m)

• High position mode : 9’ to 11.5’(2.7 to 3.5m)

• Pet mode : 8.3’ to 10’(2.5 to 3.0m)

• High density mode : 6.6’ to 20’(2.0 to 6.0m)

Area angle adjustment range Horizontal direction :±45° (in 5° steps)

Vertical direction :17° (no stage adjustment)

Ambient temperature range -25 to +55˚C (no condensation and freezing)

Mounting position Indoor/outdoor wall surface

* Can be mounted on poles and ceilings (or under eaves) using optional accessories

IP rating IP55

Connections Terminals (M2.6 self up terminal)

Weight Approx. 600g

Appearance Body:Resin (gray), Window:Resin (white)

- Bảo hành: 12 tháng.