Máy dò hồng ngoại PIR HONEYWELL ADPRO PRO E-40 (CH10073001)

- Detection principle: Volumetric medium-range.

- Nominal range (L x W): 40 x 10 m.

- Angle of beam: 15°.

- Alarm indicator: Internal LED (during commissioning).

- Data-Interface: RS-485, 9600 baud/s // on-board.

- Supply voltage: 10.5 - 30 VDC, 24 VAC ±15% auto-sensing.

- IP-Rate: IP66.

- Dimensions (L x W x H): 358 x 188 x 290 mm.

- Weight: Approx. 1.51kg.

Thông số kỹ thuật

Model PRO E-40

Detection principle Volumetric medium-range

Nominal range (L x W), width at nominal range 40 m x 10 m

Angle of beam (angle of aperture, AA) 15°

360PROtectTM - Near Surrounding Area Surveillance -1 m up to +8 m (-3 ft up to +26 ft)

Spectral response 8-14μ, double filtered

Filter (Front Window) Standard versions: HDPE-Filter, IR transmissive / H-Versions: Silicon Wafer

Pyroelectric Sensor (differential) single-channel

Detection speed range 0.2 - 5 m/s (0.7 - 16 ft/s)

Alarm outputs (free programmable) 3

Alarm settings (free programmable) Alarm in Main Zone; Alarm Creep Zone (360PROtect); Pulse Count; Alarm Tamper Bracket Switch, Alarm Cover Switch, Alarm Detector Alignment, Alarm Antimasking, Alarm Fault (Power Supply, Temperature, Heating)

Output load (max.) 3x (Standard) / 5x (H-version) Solid State Relais 75 mA max. @ 60 VDC

Alarm indicator Internal LED (during commissioning)

Data-Interface RS-485, 9600 baud/s // on-board

Cable feed (diameter) Rubber seal for 4x 5-8mm cables and 4x 1-2mm wires

Cable termination (screw terminals) Ø: 0.255 - 1.29 mm; A: 0.05 - 1.31 mm²; AWG: 30 - 16

Supply voltage 10.5 - 30 VDC, 24 VAC ±15% auto-sensing