Photoelectric Beam Sensor TAKEX PXB-100ATC

- Upper and lower beams individually detect objects.

- The alarm output can be selected OR-gate (blocking either upper or lower beam) or AND-gate (blocking both upper or lower beam) according as a site.

Feature

- Anti-Crawl Detection: Upper and lower beam individually detects the objects and issues a signal only by blocking each beam.

- At . Hf Separate Output

+ AT output: OR-gated by upper and lower beam.

+ HF output: AND-gated.

- Synchronized High Power Beam: By synchronizing the timing of transmitting and receiving beam, the stacking system will be more reliable.

- Double Modulation

+ Double modulated beams are designed to distinguish the true beam signal from accidental or deliberate interference from sunlight, car headlights and other artificial light sources.

+ This increases the reliability in the outdoor security system.

- Quad High Power Beam

+ The beam power is 100 times of the minimum requirement.

+ The beam distance is 10 times of the described specification.

+ This high power beam also realizes the reliability against the harsh conditions like fog, snow, heavy rain.

- Ecology: RoHS adapted - Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

- Insect/Water Prevent: IP65 rated, with anti-insect bushing and special wading.

- Anti-Bird Spike: Keeps birds and small animals away from the sensor, helping to reduce false alarms.

- Drip-Proof Housing: Prevents rain and snow from streaming down the front side of housing, helping to avoid false alarm.

- Dual Ring Sight: Enables better and clear view for easy beam alignment.

- Target Color

+ The vivid color of the internal structure can be recognized easily from the far end in the beam alignment procedure.

+ The color differs between a transmitter and a receiver which helps easy installation and checking.

- Increased Range Adjustment Allowance

+ Vertically ±20°compared with previous version.

+ It may adapt to the slope installation flexibly.

- Wireless Alignment Checker: Enables easy and accurate beam alignment.(Sold separately).

- Lightning Protection

+ Minimizes the damage caused by induced lightning through wiring.

+ Rated up to 10,000V under normal mode and 15,000V under common mode.

Specification

Model PXB-100ATC

Detection system Near infrared pulsed beam interruption system

(Anti-crawling, Anti-corrosion)

Infrared beam Double modulation pulsed beam by LED

Protection distance Outdoor 330' (100m) or less

Response time AT output : 0.05sec by upper/lower level simultaneous interruption 0.1/0.2/0.3/0.5sec by either level interruption

HF output : 0.05sec by upper/lower level simultaneous interruption

Power supply 12 to 30V DC (Non-polarity)

Current consumption Transmitter: 27mA Receiver: 48mA

Alarm output Dry contact relay output N.O./N.C. selectable

Contact action: Interruption time (Min.2sec.)

Contact capacity: 30V (AC/DC) 0.25A (resistive load)

Protective resistor

Environmental output Dry contact relay output N.O./N.C. selectable

Action: Activated when weather condition gets worse (Min.5sec.)

Contact capacity: 30V (AC/DC) 0.25A (resistive load)

Protective resistor

Tamper output Dry contact (N.C.)

Action: Activated when cover is detached

Contact capacity: 30V (AC/DC) 0.1A (resistive load)

Protective resistor

Alarm LED Red LED (Receiver) ON: when an alarm is initiated

Attenuation LED Red LED (Receiver) ON: when beam is attenuated

Ambient temperature range -31ﾟF to +151ﾟF(-35 to +66℃)

Beam adjustment Horizontal: ±90°, Vertical: ± 20°

Functions Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker

Mounting positions Outdoor, Indoor

IP rating 65

Wiring Terminals

Weight Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)

Appearance PC resin (wine red)

- Bảo hành: 12 tháng.