Item Specifications

Product Number FX-501-C2

Part Number FX-501-C2

CE marking directive compliance EMC Directive, RoHS Directive

Supply voltage 12 to 24 V DC+10-15 % Ripple P-P 10 % or less

Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)

ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)

Output NPN open-collector transistor

- Maximum sink current: 100 mA (Note 1)

- Applied voltage: 30 V DC or less (between output and 0 V)

- Residual voltage: 2 V or less (Note 2) (at maximum sink current)

(Note 1) 50 mA max. if 5 or more standard types are connected together.

(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)

Output:Output points 1 point

Output:Output operation Switchable either Light-ON or Dark-ON by L/D mode

Output:Short-circuit protection Incorporated

Response time H-SP: 25 micro s or less

FAST: 60 micro s or less

STD: 250 micro s or less

LONG: 2 ms or less

U-LG: 4 ms or less

HYPR: 24 ms or less, selectable

External input -

External input(switchable with Output 2) -

Possible external input function -

Sensitivity setting 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment

Incident light intensity display range H-SP / FAST / STD: 0 to 4,000

LONG: 0 to 8,000

U-LG / HYPR: 0 to 9,999

Timer function Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective

Timer function:Timer period Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms aCảm biến sợi quang FX-101 sử dụng ánh sáng quang học để giám sát vật thể, FX-101 cho phép cài đặt ngưỡng sáng với mỗi vật thể giám sát cụ thể, có chế độ dạy giám sát do đó có khả năng giám sát vật thể mang tính chọn lọc cao. FX-101 hiển thị ánh sáng thu được, ngưỡng cài đặt bằng led 7 thanh. FX-101 khi kết hợp với sợi quang sẽ rất linh động vì tính nhỏ gọn và linh hoạt của sợi quang nên phù hợp với rất nhiều ứng dụng trong các thiết bị điều khiển, tự động hóa công nghiệp.pprox., 1 ms approx.

Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.

Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.

each output is set individually

Emission amount setting function Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]

Interference prevention function Incorporated (Note) , selectable either automatic interference prevention or different frequency

(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.

- Number of sensor heads mountable closely (Unit: set)

Response time: IP-1

H-SP: 0

FAST: 2

STD: 4

LONG: 8

U-LG: 8

HYPR: 12

Various settings Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.

Protection IP40 (IEC)

Ambient temperature -10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉　

Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil)

Material Enclosure, Case cover: Polycarbonate

Switch: Polyacetal

Cable -

Cable extension -

Weight Net weight: 15 g approx.

Gross weight: 70 g approx.

Accessory FX-MB1 (Amplifier protection seal): 1 set