Photoelectric Beam Sensor TAKEX PXB-100SW

- Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.

Features

- 4 x synchronised high power beams.

- Low-current consumption for battery or solar operation.

- 4 selectable beam channels to prevent crosstalk.

- Double modulation for unsurpassed light immunity.

- Increased beam separation minimises nuisance alarms.

- Vivid internal colour aids beam alignment procedure.

- Lightning and surge protection up to 15kV.

- Environmental monitoring circuit.

- Dynamic auto-gain lock (AGL).

- 50,000 lux sunlight immunity.

- IP65 housing.

- Optional BA-6SLA solar panel/battery pack available.

Specifications

Model PXB-100SW

Product type Photoelectric Beam Sensor

Detection system Near infrared pulsed beam interruption system

(TX-RX 4 beam simultaneous interruption)

Infrared beam Double modulation pulsed beam by LED

Protection distance Outdoor 100m (330ft) or less

Indoor 200m (660ft) or less

Max. beam range Outdoor 1000m (3300ft) or less

Indoor 1000m (3300ft) or less

Response time 0.05 sec. to 0.7 sec. (Variable at pot)

Power supply 5 to 30VDC (polarity)

Current consumption 5 to 8VDC

- Transmitter:

+ Max: 3.7mA

+ Max 8.2mA

- Receiver:

+ Max: 2.3mA

+ Max 10mA

10 to 30VDC

- Transmitter:

+ Max: 5.2mA

+ Max 9.4mA

- Receiver:

+ Max: 3.1mA

+ Max 10.7mA

Alarm output - Dry contact relay output form N.O./N.C switchable

- Contact action : Interruption time (min. 2 sec)

- Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor

Environmental output - Dry contact relay output form N.O./N.C. switchable

- Action: activated when weather condition worsens

- Capacity: 30V (AC/DC) 1A (resistive load) Protective resistor

Tamper output - Dry contact relay (N.C.)

- Action: activated when cover is detached

- Capacity: 30V (AC/DC) 0.1A (resistive load) Protective resistor

Alarm LED Red LED (Receiver) ON: when an alarm is initiated

Attenuation LED Red LED (Receiver) ON: when beam is attenuated

Ambient temperature range -35°C to +66°C (-31°F to +151°F)

Beam Adjustment Horizontal : ±90° / Vertical : ±20°

Functions - Modulated beam frequency selection

- Tone indicator

- Environmental module

- Beam power selection

- Transmitting power adjustment

- Alarm output selection

- Environmental output selection

- Monitor jack

- Tamper

- Response time adjustment

- Upper / Lower beam switch

- Wireless Checker

Mounting positions Outdoor, Indoor

IP rating IP65

Wiring Terminals

Weight Transmitter: 1500g (52.5oz)

Receiver: 1550g (54.3oz)

Appearance PC resin (wine red)

- Bảo hành: 12 tháng.