Sensor Speaker TAKEX PVW-12TE

- PVW-12TE is a sensor speaker which detects passive infrared emitted from human beings and sound two different messages depending on the day light or control input settings.

- Suitable for indoor and outdoor use

+ Designed to be rainproof, PVW-12TE can be used outside.

+ It is equipped with AND detection system which will offer more reliable protection.

+ AND detection system will issue an alarm signal only when detection occurs in both horizontal and downward zones simultaneously.

- Two recordable messages / Dual control (daylight or ARM/DISARM settings)

+ The unit can record two different messages (Max. 8sec. each).

+ At detection, it will trigger one of the messages depending on the day light or control input (ARM/DISARM) settings.

+ Day light control: Night:Message 1 , Day:Message 2.

+ External input control: ARM: Message 1, DISARM:Message 2.

- Two recording methods available: Message can be recorded through built-in microphone or jack input which fits to external equipments such as tape recorders or personal computers.

- Replay time adjustable: Replay time of messages is adjustable between 2sec. and 5min.

Specification

Product name Sensor speaker (For indoor/outdoor use)

Model PVW-12TE

Detection system Passive infrared

Coverage Horizontal coverage

Max. detection distance: 40' (12m) Horizontal detection zone: 7 zones

Detection angle: 90degrees Downward detection zone: 7 zones

Adjustment range Horizontal: +/-90degrees(+/-3degrees of fine adjustment is available)

Detection distance: 10' to 40' (3 to 12m)

(By adjusting vertical angle of downward curtain)

Supply voltage 10 to 30VDC (Non polarity)

Current consumption 55mA MAX. for standby

300mA MAX. for operation (When Max. volume)

ARM/DISARM input N.O./N.C. selectable with a switch

N.O.: Armed when closed

N.C.: Armed when opened

Response time: 300msec or longer

Input resistance: 1kΩ; or less

Replay input N.O./N.C. selectable with a switch

N.O.: Armed when closed

N.C.: Armed when opened

Response time: 300msec or longer

Input resistance: 1kΩ or less

Day light control Recognized as night when the illuminance of the surrounding

area is lower than the set illuminance.

Contact output Dry contact relay output N.O./N.C. selectable with a switch

Contact capacity: 30V (AC/DC), 0.5A MAX.

Contact operation: One shot operation Approx. 2sec.

Sound output Replay the two different messages through the built-in speaker

Operation: off delay operation

Repeat sounds during detection time + Approx. 2sec. to 5min.

Output sounds: [Message 1] and [Message 2] (Max. 8sec. each)

Sound volume adjustment: 80dB Max.

Recording method: Built-in microphone or Jack input

Operation LED Red LED

Blinks for warming-up - LED can be disabled with a switch.

Lights for detection - LED can be disabled with a switch.

Fast blinks for recording standby

Lights for recording (Max. 8sec.)

Tamper output Dry contact relay output: NC

Capacity: 30V (AC/DC), 0.5A MAX.

Pulse count settings Once/Three times (Selectable with a switch)

Sensitivity adjustment 30% to 170% (By potentiometer)

Connection Terminals

Ambient temperature - 4F to + 122F (- 20C to + 50C)

Mounting position Indoor / Outdoor (Rain-proof)

Weight 16.8 oz (480g)

Appearance Body: AES resin Lens: PE resin

- Bảo hành: 12 tháng.